Oil Seal Materials

Regular inspection and maintenance of right valve cover gaskets, intake valve cover gaskets, head gaskets, and valve cover gaskets are essential to identify signs of wear, damage, or leakage. Proper replacement of worn or damaged gaskets is crucial for maintaining the integrity and performance of the vehicle's systems. Adhering to recommended service intervals and using high-quality replacement components are essential for optimizing the performance and longevity of the vehicle's gaskets.

Most standard oil seals have to comply with the DIN 3760 and ISO 6194 standards. Different standard types of oil seals are available that comply with these requirements.

Under the action of the skeleton oil seal, the rigidity of the oil film just makes the oil film and the air contact end form a crescent surface, which prevents the leakage of the working medium and realizes the sealing of the rotating shaft. The sealing ability of the oil seal depends on the thickness of the oil film on the sealing surface. If the thickness is too large, the oil seal will leak; if the thickness is too small, dry friction may occur, causing the oil seal and shaft to wear; if there is no oil film between the sealing lip and the shaft, it is easy to cause heat and wear. . Therefore, when installing, it is necessary to apply some oil on the sealing ring, and at the same time ensure that the skeleton oil seal is perpendicular to the axis line. If it is not perpendicular, the sealing lip of the oil seal will drain the lubricating oil from the shaft, which will also lead to excessive sealing of the lip. wear. During operation, the lubricant in the casing seeps out a little, so that it is ideal to form an oil film on the sealing surface.

MAKING THE CHOICE OF AN OIL SEAL VS. MECHANICAL SEAL

Before fitting the oil seal, it is essential to check that the oil seal, shaft and bore are clean and undamaged. The surfaces the oil seal will come into contact with must be free of sharp points or burrs. The sealing lip is fragile, so even minimal damage can cause a leak. It is also important that the shaft and bore are correctly finished.

Assembling the oil seals is only possible with the right assembly tools. Due to the high risk of damage during assembly, it is important that you have tools with which you can work carefully. A bearing fitting tool set is ideal.

Temperature - Just like pressure, the temperature that your oil seal will be operating in must be known so that you can choose one that can withstand the heat or cold. PTFE have the widest range of temperature, making them useful for machines who can see usage in extreme weather or elements.