Leather is probably the oldest of the lip materials still in common use, but the move towards mass production methods has seen a massive increase in the development of synthetic rubbers which lend themselves to accurate and repeatable injection and compression moulding. Nitrile (NBR) is still by far the most common elastomer for “normal” use, whilst Viton® (FKM/FPM) is rapidly replacing Polyacrylate (ACM) and Silicone (VMQ) for high-temperature applications. Viton® also has high resistance to abrasion and chemical attack making it a preferred elastomer. Recent developments in the use of PTFE for Rotary shaft seals has caused widespread interest particularly for high-speed shaft rotation or poor lubrication applications.

These are now the current and most recent innovation that is taking over from the HID and Halogens. The LEDs employ the diodes technology where they produce light when electric current excites their electrons. They require low power and energy and still produce brighter light than halogen headlights which also leads to LEDs’ longer life-span. Their diodes can be manipulated into various shapes providing unique configurations. With LED technology, the vision is much improved and more focused. Although the initial cost of HID and halogen bulb is less than LEDs, the operational and maintenance costs of LED are significantly lower. LEDs, having a longer life, reduce maintenance and lamp replacement cost. Because LEDs need to be replaced less frequently, the owner spends less on new lamps and the labor needed to change them. LEDs also consume less energy; thus the overall cost of a LED system can be significantly lower than that of conventional lighting systems.

Type B Oil seals

1. What are oil seals?

1. Sealing Element

For installation tools, make sure that they do not have any jagged edges that may damage the seal during the installation process.

One of the key features of Mico spark plugs is their advanced technology, which allows for better ignition and combustion. This leads to smoother engine operation and enhanced fuel efficiency, ultimately saving you money on fuel costs. Additionally, Mico spark plugs are engineered to resist fouling and corrosion, ensuring consistent performance over time.

Remove all traces of the old gasket from the pump and engine, using a paint scraper if necessary.

③ Lip type code

Application Industry

Heat resistance

In addition to these standardised types, the following special types are also available:

Out-gassing

5.  TYPES OF FLUID: Numerous oil seals can interact with oils, fuels, grease, water and more. However, know exactly what type of fluid the rotary shaft seal will be in contact with will ensure the longevity of the seal and the machinery.

In conclusion, spark plug wires and new spark plugs are essential components in the ignition system of internal combustion engines, contributing to the efficiency, performance, and reliability of the vehicle. Understanding the significance of these components and their proper maintenance and replacement is crucial for optimizing the performance and longevity of the vehicle's ignition system.