Halogen lights are in fact the most commonly used headlights on most cars. Their invention dates back to the 1960s which was as a solution towards generating light with limited resources. Just like the incandescent lights, halogens use heated tungsten filament to produce light. The filament is however encased in a bubble of halogen gas unlike the incandescent, as a measure towards improving longevity and performance. These lights are easy to manufacture making the manufacturing process inexpensive. Moreover replacement costs are also very low. Halogen lights can fit most cars of different models as they come in different sizes and shapes. These lights however do not provide the best visibility as the white HID bulbs and LEDs. Quite a large amount of heat is lost while using these headlights and hence wasted energy. Moreover, they are very fragile requiring extra care unlike the LEDs and HID

High mileage oil addresses specific weaknesses in your engine that are related to old age. It’s like a healing ointment for overused engine parts.

Different Types Of Bearing Seals

1. What are oil seals?

ERIKS type M (type B according to the DIN standard) has a single metal casing and rubber sealing lip. Since the casing is made of metal, it must be fitted in a well-finished, undamaged groove. Large volumes of oil seals with metal casings are often cheaper, which is why they are often used as original equipment in machines. However, if an oil seal has to be replaced, types with a rubber exterior (type R or RST) are easier to fit. Type MST is similar to M and commonly used. The difference is the dust lip in the MST oil seal that prevents dust and dirt reaching the sealing lip, and extends its service life in dusty environments.

 Oil seals go by many names, such as shaft seals, dirt seals, grease seals, lip seals, and many other variations of these. They are essentially simple devices used in rotary shaft equipment to prevent lubricant from escaping and for excluding contaminants such as dust, dirt and water. An oil seal’s most important function, however, is that it protects every type of ball, sleeve and roller bearing in the rotating shafts. The seals also prevent the integration of two different fluids that shouldn’t mix, such as oil and water.

HID (High Intensity Discharge)