When it involves a repair, you must first remove the old oil seal. To remove an oil seal, it is important to use the right tools to avoid damaging the shaft and bore. The best solution is therefore to pull out the oil seal without having to completely dismantle the shaft. This can be done by making a few holes in the oil seal with an awl and a hammer. You can then use a hook to pull the oil seal out of its seat. You could also screw some screws into the holes and then slowly pull out the screws to extract the oil seal from its housing. Be careful not to damage the shaft or housing in the process.

However, when you actually select the oil seal to use, the most important factors are past success history and points of improvement, so it is not necessary to follow this order to the letter.

In this post, we’ll go over the fundamental things you need to know as a DIYer when working with oil seals.

Lubricants applied between moving and stationary elements of mechanical equipment help to prevent damage. But when the equipment are under high pressure, the lubricants tend to escape, hence the need for oil seals to prevent the clashing of dry parts. Practically all mechanical equipment, including car engines, assembly machines, and PTFE machined parts use these oil seals to prevent harmful interaction that can result in damaged parts.