Function of hydrodynamic ribs

Seals are essential to protecting the bearings of any rotating shaft assembly -They prevent contaminants such as dirt, dust and water, while also preserving the system’s lubricant.

The basic principle of an oil seal is fairly straightforward. It is installed adjacent to the bearing, with the flexible lip against the rotating shaft and the casing pressed into the housing to hold the seal in place. It’s important that the sealing lip is lubricated to prevent it from overheating as a result of any generated friction. It’s also crucial to understand which type of seal is appropriate for your particular machinery. Before selecting your seal, consider the environment, temperature, pressure and shaft speed of your machine, as well as the type of medium the seal will come into contact with during operation. These considerations will all determine the size, colour, and type of lip material or sealing element to choose, and whether it can be sealed in or sealed out.

Nitrile is the most widely used rubber (elastomer) and it’s recommended as the best for almost all standard applications. This is solely due to the fact that nitrile has some intrinsic properties, such as low cost and compatibility with most environments. Some of the general applications of nitrile are non-latex gloves, automotive transmission belts, footwear, gaskets, synthetic leather, hoses, o-rings, and oil seals.

No single physical property of rubbers is responsible for the successful performance of an oil seal or ‘O’ ring. The ultimate tensile strength, breaking elongation, modulus, shore hardness, creep and stress relaxation in tension and compression loads are all important physical properties that characterize a seal or ‘O’ ring. Compression strength and set together with stress relaxation or decay are important for effective sealing. The difference in these properties in a swollen seal is highly critical. An optimum swelling value in a fluid medium is a desirable feature. De-swelling decreases the seal pressure against the wall of the housing where the seal is fixed, leading to leakage. Over swelling minimizes the physical properties of the rubber. Seals made of polysulfide rubbers have extreme fuel resistance but undesirably high compression set. The effect of temperature on the seal is an important factor. Swelling under stress can increase at higher temperatures and a suitable compounding technique should be adopted to reduce this effect.

The company manufactures its line of cartridge assembly seals for industrial pumps, agitators, reactors, and Industrial Compressor Seals. They also specialize in mechanical seals emergency repair services 24/7 to minimize industrial downtime.

Oil Seal Part Number System

Cover jagged edges: Sharp and jagged corners can cause tears in the o-ring. They have to be covered as even a tiny tear can break the seal.

A piston oil seal, also known as a piston seal ring, is a critical component in an internal combustion engine. It plays a crucial role in preventing oil leakage from the piston and ensuring efficient engine operation.

Metal O.D. wall type (with a reinforcing inner metal case) Protects the main lip.

Lay out the pieces of the new gasket on clean newspaper, and note how the joints fit.