VMQ, also known as silicone, is also used for oil seals, but this is less common because the mechanical strength of VMQ is low and this material has poor wear-resistance This makes it less suitable for dynamic applications, but it can withstand fairly low and high temperatures from -60 °C to 200 °C. Many types of VMQ are also suitable for contact with pharmaceutical and food products, so VMQ is an option worth considering. VMQ oil seals are usually available on request.

Wear and oil loss remains two of the most frequent signs of engine seal failure and, if not paid attention to, it can give rise to a breakdown in the vehicle’s system. Regular maintenance and routine oil changes minimize the issues associated with oil seals and potential oil loss. 

Heat resistance

Several variables, including maximum temperatures, required lubricants, available space, and more, may influence your choice of bearing seal. Each factor can affect the type of bearing best for your application, the amount of material required, and other factors. Although the choice of seals is crucial to the effectiveness of your bearings, you don’t have to make that choice alone. Our experts at NBC bearings can collaborate with you to identify the bearings and bearing seals that provide the best, most affordable solution for your application, environment, and finished product.

HALOGEN

When the total eccentricity is excessive, the sealing edge of the seal lip cannot accommodate shaft motions and leakage may occur.
Total eccentricity is the sum of shaft runout and the housing-bore eccentricity.
Total eccentricity, shaft runout and housing-bore eccentricity are generally expressed in TIR (Total Indicator Reading).