Common materials used in oil seals include nitrile rubber, fluorine rubber, silicone rubber, acrylic rubber, polyurethane, polytetrafluoroethylene, etc. When selecting the material of the oil seal, the compatibility of the material with the working medium, the adaptability to the working temperature range and the ability of the lip to follow the rotating shaft at high speed must be considered. When the oil seal is working, the temperature of its lip is higher than the working medium temperature by 20~50°C. Attention should be paid when selecting the oil seal material. The working range of the oil seal is related to the material used for the oil seal: the material is nitrile rubber (-40~120°C), Aggreko rubber (ACM) -30~180°C, fluorine rubber (FPM) -25~300°C.
Helix Seal
Different Types of Oil Seals
Shaft oil seals are an essential component in machinery and equipment used in various industries. They play a crucial role in preventing the leakage of fluids and keeping contaminants out of the system, ensuring smooth operation and prolonging the lifespan of the machinery.
Once you have selected the most suitable seal available, considering the environment, temperature, shaft speed, pressure, lubrication availability, as well as the size, of course, the seal should be stored adequately and then fitted properly. Here are a few suggestions that could help:-
Lift off the cloth, making sure no debris falls into the valve gear.
Obtaining adequate adhesion of fluoroelastomer compounds to metal inserts is a major consideration in fabrication of shaft seals. Adhesive systems worked out for bisphenol-cured VDF/HFP/TFE elastomers often do not perform adequately for peroxide-curable fluoroelastomers and more base-resistant polymers that contain little or no VDF. The trend toward use of more resistant fluoroelastomers in shaft seals has necessitated considerable effort on compounding and adhesive system development to get adequate bonding of the new materials. Silane-type primers are often used to coat metal inserts; these contain residual active groups such as amine functions that interact with the fluoroelastomer compound to attain good adhesion, especially for VDF/HFP/TFE elastomers. Other adhesive systems, using epoxy compounds or tie-coats, may be necessary for difficult bonding situations.3
Oil seals for cars
5
Copper and nickel are relatively inexpensive, while platinum is much more expensive but also much more durable and resistant to wear Copper and nickel are relatively inexpensive, while platinum is much more expensive but also much more durable and resistant to wearcar spark plug price.