Studies of titanium dioxide as a food additive suggest health dangers

Key Applications

In response to the allegations, Justin Comes, vice president of research and development at Mars Wrigley North America, told Health that safety is of paramount importance to Mars Wrigley. While we do not comment on pending litigation, all Mars Wrigley ingredients are safe and manufactured in compliance with strict quality and safety requirements established by food safety regulators, including the FDA.

Natural barite and anthracite containing more than 95% barium sulfate are mixed and fed at a ratio of 3:1 (mass). After being crushed to a diameter of less than 2cm, it enters the reduction furnace. The furnace temperature is controlled to be 1000-1200°C in the front section and 500-500 in the back section. 600°C, the reduction furnace rotates at a speed of 80 seconds per revolution, and the reaction conversion rate is 80% to 90%.

Lithopone is manufactured by a process (Fig. 1) in which barium sulfide solution is prepared by reducing barite ore (BaSO ₄) with carbon and leaching the resulting mass.

Above 20%, it is recommended to replace 1 kg TiO2 with 1.3 kg of Lithopone 30%.  

Testing samples were made mixing 100 uL of TiO₂NPs suspensions (0.2 mg/mL and 0.02 mg/mL) and vitamins@P25TiO₂NPs (0.2 mg/mL and 0.02 mg/mL) with 100 μL ATCC 29,213 methicillin-sensitive Staphylococcus aureus (MSSA) (10⁷ in PBS, pH 7). Controls were made replacing nanoparticles with the same volume of PBS. The concentrations of nanoparticle suspensions were chosen based on the FDA approved maximal and the minimal amount usually found in sunscreens, which are 20% and 2% (this is equivalent to 0.2 mg/mL and 0.02 mg/mL for nanoparticles suspensions). The cream concentration, on the other hand, was an intermediate value of 10%.

Lithopone is a mixed zinc sulfide-barium sulfate brilliant white pigment that contains about 30% zinc sulfide. The original light sensitiveness of this pigment has been mitigated by purification and by the addition of such agents as polythionates and cobalt sulfate.

2. Barite calcination method A solution of barium sulfide is prepared. The sulfuric acid and zinc oxide are reacted, purified by adding potassium permanganate and zinc powder, and compressed to obtain a zinc sulfate solution. Then, the prepared barium sulfide solution is mixed and subjected to a metathesis reaction to obtain a mixture of zinc sulfide and barium sulfate, and then the precipitate is subjected to pressure filtration, calcination, wet grinding, drying, and pulverization to obtain a zinc white product.

The FDA continues to allow for the safe use of titanium dioxide as a color additive in foods generally according to the specifications and conditions, including that the quantity of titanium dioxide does not exceed 1% by weight of the food, the FDA said in a statement to USA TODAY.

Titanium dioxide is an insoluble mineral, meaning it cannot dissolve in water. Known for its bright, white pigment, manufacturers use titanium dioxide in many different capacities, including in cosmetics, foods, and drugs. 

The gastrointestinal tract is a complex barrier/exchange system, and is the most important route by which macromolecules can enter the body. The main absorption takes place through villi and microvilli of the epithelium of the small and large intestines, which have an overall surface of about 200 m². Already in 1922, it was recognized by Kumagai, that particles can translocate from the lumen of the intestinal tract via aggregation of intestinal lymphatic tissue (Peyer’s patch, containing M-cells (phagocytic enterocytes)). Uptake can also occur via the normal intestinal enterocytes. Solid particles, once in the sub-mucosal tissue, are able to enter both the lymphatic and blood circulation.

Titanium dioxide has many purposes in both food and product development.