As shown in Figure 1, sealing devices come in two types: contact and non-contact.
Oil seals are among the major contact type sealing devices.
 

Necessary to check compatibility with fluids
(See *2)

One of the key advantages of the 30-50-10 oil seal is its ability to provide a tight seal without compromising on flexibility. This means that the oil seal can effectively prevent oil leaks while allowing for smooth movement of the machinery or equipment it is installed in.

Modern engine oils, such as the current SG classification for gasoline engines, contain a large fraction of additives, many of which are detrimental to fluoroelastomers. The primary functions of oil-additive packages are to protect metal parts, avoid deposits in the engine, minimize oil degradation, and adjust fluid viscosity. Little attention has been paid to avoiding damage to rubber seals. Instead, elastomer producers have been expected to provide new, higher-performing products at no increased cost to auto manufacturers. Among the additives with moieties that may attack fluoroelastomers at high temperature are detergents (phenolates), dispersants (succinimides, alkylphenol amines), and antioxidants (amines, sulfides, hindered phenols).⁴ Many of these components are multifunctional, containing phenol or amine groups that can dehydrofluorinate and crosslink VDF-containing fluoroelastomers, leading to loss of elongation and eventual embrittlement. However, the rate and extent of reactions with seals are affected by many factors, including whether air is present in the system. When oil is exposed to air at high temperature, additives may undergo considerable changes. For example, a significant fraction of amines may be oxidized to amides, which have little effect on fluoroelastomers.⁵