The properties of lithopone are very suitable for use in the production of coatings. Because the ingredients of lithopone are zinc sulfide and barium sulfate, and the more zinc sulfide content, the stronger its covering power. This indicates a paint product with strong white covering power. It is different from water in that it reacts with acid but does not react with alkali. It has a wide range of uses. Because its structural properties are similar to titanium dioxide and its price is relatively cheap, it can also be used as a substitute for some titanium dioxide. Lithopone can be used for coloring paints, inks, pigments, rubber, paper, leather, enamel, etc.

As early as sixty years ago, zinc sulphide was first thought of as a pigment for coloring India rubber and a patent for the process of its manufacture was issued in England. But it was not until twenty years later that zinc sulphide and its manufacture was seriously considered as a pigment for paint, and in 1874 a patent was issued for a process of manufacturing a white pigment, composed of zinc sulphide and barium sulphate, known as Charlton white, also as Orr's white enamel. This was followed in 1876 by a patent issued to a manufacturer named Griffith and the product, which was similar in character to Charlton white, was known as Griffith's patent zinc white. In 1879 another patent for a more novel process was obtained by Griffith & Cawley, the product made under this process proving the best of the series placed upon the market up to that date. After that time many new processes were patented, all, however, tending to the same object, that of producing a white pigment, composed of zinc sulphide and barium carbonate, the results, however, in many cases ending with failure.

Lithopone 30% applied in masterbatch has maximum purity, good opacity and reasonable light fastness.  

Titanium Dioxide is largely produced by the reduction of titanium tetrachloride, obtained in turn from chlorination of natural rutile, synthetic rutile derived from ilmenite or even slags rich in TiO2 produced by metallurgical treatment of ilmenite. TiO2 is also manufactured by treatment of ilmenite with sulfuric acid. Raw materials and the respective production processes employed in the manufacturing of Titanium Dioxide are listed below.

Calcium carbonate and titanium dioxide are two important minerals that are widely used in various industries. While they share some similarities, they also have distinct differences when it comes to their manufacturing processes and applications.

Physical and Chemical Properties

Lithopone

After oral ingestion, the absorption of titanium dioxide particles is low, however they can accumulate in the body, Maged Younes, chair of the European Food Safety Authority's expert Panel on Food Additives and Flavourings, said in a May 2021 statement.

At present, the equipment and manufacturing process of domestic manufacturers of polyvinyl butyral are constantly getting closer to those abroad. For example, the wonderful use of polyvinyl butyral (PVB) has occurred in the printing industry and ceramic industry. Therefore, the domestic application of polyvinyl butyral (PVB) has an obvious upward trend in recent years.

For example, in the glass industry, it is because polyvinyl butyral (PVB) has good low-temperature impact strength, windability, light transmittance, light resistance, weather resistance, sound insulation, UV insulation and other properties, so that once the laminated glass is sealed together, the glass sandwich (i.e. laminated material) will appear as a whole and look like ordinary glass. For example, in the porcelain industry, polyvinyl butyral is made into a film and used for printing paper film of ceramic (or enamel) products. First, it reduces the original glue small paper Decal process, reduces the production cycle and production cost, and second, it makes its ceramic (or enamel) patterns bright in color and smooth in texture.

With the rapid development of science and technology in recent years, more and more industries have found the characteristics of polyvinyl butyral (PVB): high strength, high toughness, fatigue resistance, corrosion resistance and so on. Compared with traditional materials, polyvinyl butyral (PVB) is more and more widely used because of its larger development space and wider application fields!

Application field of polyvinyl butyral -- safety glass

The membrane made of polyvinyl butyral (PVB) is a special product used to manufacture safety glass and bulletproof glass. Safety glass is a special glass made of a layer of PVB diaphragm sandwiched between two layers of ordinary glass. It has good low-temperature impact strength, windability, light transmittance, light resistance, weather resistance, sound insulation, ultraviolet insulation and other properties. When subjected to strong external impact, PVB diaphragm can absorb impact energy, so that the glass will not break or prevent debris from hurting people. Moreover, the safety glass added with PVB diaphragm has the characteristics of high transparency, water resistance and aging resistance, and can be used in the environment of - 60 ℃. In addition, it can also be used as transparent material to replace plexiglass.

Application field of polyvinyl butyral -- ceramic film flower paper 

Lithopone is produced by coprecipitation of barium sulfate and zinc sulfide. Most commonly coprecipitation is effected by combining equimolar amounts of zinc sulfate and barium sulfide: