feather inner duvet

...
feather inner duvet2025-08-14 08:31
1032

  • Conclusion


  • - Type of Fittings The crimper should be compatible with the fittings you plan to use. Some crimpers are designed for specific brands or types of fittings.


  • Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
    Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
    Hose bending radius is bigger when it is in motion.
    Choose proper fittings, avoid twisting in hose lines bent in two planes.
    Avoid twisting in hose by use clamp properly.
    Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
    Leave proper length when the hose in connected
    Choose proper fittings, avoid too small bending radius and excess force.
    Choose proper fittings, avoid excessive hose length.
    Reuse friction, avoid hose touching the object directly or far away from the object.
    Hose Active Working Pressure Working Life
    As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
    Store Conditions of the Assembly.
    1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
    2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
    3.Can not be placed with erosive products or exposed over gas-volatile on these products.
    4.Far away from heat source and equipment which can produce electric field or magnetic field
    5.Avoid sunshine or strong artificial light source
    6.Avoid to touch the sharp objects or the ground
    7.Guarantee against rodent attacking.
    8.Observe the rule of “First in, then first out”

  • 2. Soft or Spongy Brake Pedal A brake pedal that feels less firm than usual can suggest that air has entered the brake lines or that the hoses are expanding under pressure. Both scenarios could compromise braking performance.


  • Applications of 1% 4% Compressor Hoses


  • Xulosa


  • What is a High Pressure Steam Hose Pipe?


  • 3. Temperature Resistance These hoses can handle a wide range of temperatures, making them suitable for various environments, whether indoors or outdoors. This feature is critical in applications where the hose may be exposed to extreme weather conditions.