When selecting oil seals for wheel hubs and steering mechanisms, it is essential to prioritize quality, durability, and compatibility with specific vehicle models. High-quality oil seals are designed to withstand the demanding conditions of automotive operation, providing reliable sealing solutions that contribute to the overall performance and safety of the vehicle. Choosing reputable suppliers and manufacturers known for producing high-quality oil seals is crucial to ensure the reliability and longevity of these critical components.

Polytetrafluoroethylene 
Chemical resistant 
Low coefficient of friction poor elastic properties not wear resistant if used by dynamic applications

Orient your seal the same way as the initial install.The sealing lip should face the lubricant that requires sealing.The second lip on a double lip oil seal is intended as a dust lip. The seal must be installed at a 90°, or perpendicularly, to both the shaft and housing bore. This is an issue in cases where the housing does not have a counterbore or shoulder the seal can seat up against.

EPDM oil seals are less common. They are used in solvent, hot water and steam applications, EPDM resists low temperatures down to -50 °C and UV radiation well. Some types of EPDM are also suitable for higher temperatures up to +150 °C. EPDM oil seals are usually available upon request.

Propylene (fluorinated ethylene) 

Viton Oil Seals - A synthetic rubber and fluoropolymer elastomer, Viton is used to make oil seals that provide resistance in both high temperature, up to 250°C and low compression set components. They also offer a high resistance to chemicals and abrasions, so they can be used in elements that regularly interact with petroleum and solvents.

Developments and issues