Titanium dioxide, or TiO2, sometimes referred to as E171, is an inorganic, solid substance used in a wide range of consumer goods including cosmetics, paint, plastic and food, according to the American Chemistry Council.
As early as sixty years ago, zinc sulphide was first thought of as a pigment for coloring India rubber and a patent for the process of its manufacture was issued in England. But it was not until twenty years later that zinc sulphide and its manufacture was seriously considered as a pigment for paint, and in 1874 a patent was issued for a process of manufacturing a white pigment, composed of zinc sulphide and barium sulphate, known as Charlton white, also as Orr's white enamel. This was followed in 1876 by a patent issued to a manufacturer named Griffith and the product, which was similar in character to Charlton white, was known as Griffith's patent zinc white. In 1879 another patent for a more novel process was obtained by Griffith & Cawley, the product made under this process proving the best of the series placed upon the market up to that date. After that time many new processes were patented, all, however, tending to the same object, that of producing a white pigment, composed of zinc sulphide and barium carbonate, the results, however, in many cases ending with failure.
Dawn Polymer Material, a brother company of Dawn Titanium, has successfully applied for an Initial Public Offerings (IPO), which has started rumours about Dawn Titanium is also about to apply for the IPO.
Different dermal cell types have been reported to differ in their sensitivity to nano-sized TiO2 . Kiss et al. exposed human keratinocytes (HaCaT), human dermal fibroblast cells, sebaceous gland cells (SZ95) and primary human melanocytes to 9 nm-sized TiO2 particles at concentrations from 0.15 to 15 μg/cm2 for up to 4 days. The particles were detected in the cytoplasm and perinuclear region in fibroblasts and melanocytes, but not in kerati-nocytes or sebaceous cells. The uptake was associated with an increase in the intracellular Ca2+ concentration. A dose- and time-dependent decrease in cell proliferation was evident in all cell types, whereas in fibroblasts an increase in cell death via apoptosis has also been observed. Anatase TiO2 in 20–100 nm-sized form has been shown to be cytotoxic in mouse L929 fibroblasts. The decrease in cell viability was associated with an increase in the production of ROS and the depletion of glutathione. The particles were internalized and detected within lysosomes. In human keratinocytes exposed for 24 h to non-illuminated, 7 nm-sized anatase TiO2, a cluster analysis of the gene expression revealed that genes involved in the “inflammatory response” and “cell adhesion”, but not those involved in “oxidative stress” and “apoptosis”, were up-regulated. The results suggest that non-illuminated TiO2 particles have no significant impact on ROS-associated oxidative damage, but affect the cell-matrix adhesion in keratinocytes in extracellular matrix remodelling. In human keratinocytes, Kocbek et al. investigated the adverse effects of 25 nm-sized anatase TiO2 (5 and 10 μg/ml) after 3 months of exposure and found no changes in the cell growth and morphology, mitochondrial function and cell cycle distribution. The only change was a larger number of nanotubular intracellular connections in TiO2-exposed cells compared to non-exposed cells. Although the authors proposed that this change may indicate a cellular transformation, the significance of this finding is not clear. On the other hand, Dunford et al. studied the genotoxicity of UV-irradiated TiO2 extracted from sunscreen lotions, and reported severe damage to plasmid and nuclear DNA in human fibroblasts. Manitol (antioxidant) prevented DNA damage, implying that the genotoxicity was mediated by ROS.
The second quarter of 2022 saw mixed market sentiments for titanium dioxide prices. Due to demands, constrained supply and ineffective production capacity brought on by the stretched supply chain, labour shortage, and high energy prices, the production of the chemical increased in Q2 of 2022. Moreover, the US Federal Reserve's tight monetary policy and high interest rates worsened the domestic trade picture, which at quarter's conclusion supported titanium dioxide's unfavourable market views.
When combined with other materials, TiO2 forms a photoactive layer that absorbs sunlight and generates electricity When combined with other materials, TiO2 forms a photoactive layer that absorbs sunlight and generates electricitytio2. This technology has the potential to significantly reduce our dependence on fossil fuels and combat climate change.Following the EU’s ban on E171, the FDA told the Guardian that, based on current evidence, titanium dioxide as a food additive is safe. “The available safety studies do not demonstrate safety concerns connected to the use of titanium dioxide as a color additive.”
In the application of lithopone in ink industry, lithopone has fine particles, loose structure, good fineness and good paint adhesion, so it can be well combined with other colors in the composition of ink.
As they mimic the synapses in biological neurons, memristors became the key component for designing novel types of computing and information systems based on artificial neural networks, the so-called neuromorphic electronics (Zidan, 2018; Wang and Zhuge, 2019; Zhang et al., 2019b). Electronic artificial neurons with synaptic memristors are capable of emulating the associative memory, an important function of the brain (Pershin and Di Ventra, 2010). In addition, the technological simplicity of thin-film memristors based on transition metal oxides such as TiO2 allows their integration into electronic circuits with extremely high packing density. Memristor crossbars are technologically compatible with traditional integrated circuits, whose integration can be implemented within the complementary metal–oxide–semiconductor platform using nanoimprint lithography (Xia et al., 2009). Nowadays, the size of a Pt-TiOx-HfO2-Pt memristor crossbar can be as small as 2 nm (Pi et al., 2019). Thus, the inherent properties of memristors such as non-volatile resistive memory and synaptic plasticity, along with feasibly high integration density, are at the forefront of the new-type hardware performance of cognitive tasks, such as image recognition (Yao et al., 2017). The current state of the art, prospects, and challenges in the new brain-inspired computing concepts with memristive implementation have been comprehensively reviewed in topical papers (Jeong et al., 2016; Xia and Yang, 2019; Zhang et al., 2020). These reviews postulate that the newly emerging computing paradigm is still in its infancy, while the rapid development and current challenges in this field are related to the technological and materials aspects. The major concerns are the lack of understanding of the microscopic picture and the mechanisms of switching, as well as the unproven reliability of memristor materials. The choice of memristive materials as well as the methods of synthesis and fabrication affect the properties of memristive devices, including the amplitude of resistive switching, endurance, stochasticity, and data retention time.
pH-value
Titanium dioxide (TiO2). Titanium dioxide is the most common white pigment used today. As a pigment, titanium dioxide is unique because it combines both high colouring and high opacifying capacity. This is mainly due to its high refractive index (2.7). Furthermore, titanium dioxide is an excellent UV absorber (it is used in sun protective creams). Some typical properties are: density 3.3-4.25 g/cm3; pH of water suspension 3.5-10.5; particle size 8–300 nm; oil absorption 10–45 g/100 g; specific surface area 7–160 m2/g. Most titanium dioxide is produced from the rutile (TiO2) or ilmenite (titanate of ferrous iron). Titanium dioxide can be obtained using different processes.
Unfortunately, we studied that all of the above methods are employed after machining or forming, and they require a long process chain and costly production types of equipment [21–24]. Therefore, we proposed a titanium alloy implant preparation process that integrated with cutting and surface modification. The oxygen-rich atmosphere increases the partial pressure of oxygen in the oxidizing environment, and the heat generated during the cutting process increases the temperature and the rate of the oxidation. It uses the cutting heat and oxygen-rich atmosphere generated during the cutting process to form the oxide film (TiO2) to improve the corrosion resistance of the titanium alloy. The experimental equipment is shown in Figure 2. Since the cutting temperature is the most important factor in the oxide film formation process, this paper carried out researches based on theoretical analysis and experimental investigation to acquire an ideal temperature range for the cutting process to achieve the oxide layer.
Yet another study, this one published in 2006 by the International Agency for Research on Cancer said there was insufficient evidence to conclude that titanium dioxide causes cancer. However, the study also categorized the ingredient as a potential human carcinogen.
Lithopone is a white pigment composed of a mixture of barium sulfate (BaSO4) and zinc sulfide (ZnS). It is commonly used in the production of paints, plastics, rubber, and various other industrial applications. As such, manufacturers and distributors often provide Material Safety Data Sheets (MSDS) to ensure the safe handling and use of the product.
Public health groups urge FDA to cancel titanium dioxide in food, by Center for Science in the Public Interest, May 30, 2023
Nanotoxicology “focuses on determining the adverse effects of nanomaterials on human health and the environment.”