How are we typically exposed to titanium dioxide? 

Authors like to thank Sebastián García (LAMARX) for spectra acquisition, Carolina Leimbruguer for her support with TEM images and Yanina Altamirano, Nicolas Jaime and Javier Reparaz for animal care assistance.

In response to the allegations, Justin Comes, vice president of research and development at Mars Wrigley North America, told Health that safety is of paramount importance to Mars Wrigley. While we do not comment on pending litigation, all Mars Wrigley ingredients are safe and manufactured in compliance with strict quality and safety requirements established by food safety regulators, including the FDA.

≤0.4

Below are selected applications of photocatalytic pollutant decomposition processes on titanium oxide:
1. Self-cleaning surfaces: for the production of glass for spotlights, traffic lights, car mirrors, window panes, for road paints, for covering sound-absorbing screens and tunnel walls.
2. Air cleaning and odor removal: filters that are used in enclosed spaces (e.g. public toilets) or filters for air-conditioning equipment.
3. Water treatment: groundwater treatment installations, water purification installations in the intakes of drinking water from rivers.
4. Self-disinfecting materials: towels, linings, clothing, equipment in hospitals, wall surfaces of operating rooms.
5. Removal of lesions: anti-cancer therapy.

Australian researchers examined how titanium dioxide as a food additive affected gut microbiota in mice by orally administering it in drinking water. The study, published in the journal Frontiers in Nutrition in 2019, found the treatment could “alter the release of bacterial metabolites in vivo and affect the spatial distribution of commensal bacteria in vitro by promoting biofilm formation. We also found reduced expression of the colonic mucin 2 gene, a key component of the intestinal mucus layer, and increased expression of the beta defensin gene, indicating that titanium dioxide significantly impacts gut homeostasis.” The changes were then linked to colonic inflammation, along with a higher expression of inflammatory cytokines, which are signal proteins that help with regulation. The researchers concluded that titanium dioxide “impairs gut homeostasis which may in turn prime the host for disease development.”

Titanium dioxide particles help light scatter and reflect, Kelly Johnson-Arbor, MD, a medical toxicology physician at the National Capital Poison Center, told Health. Because of that, we often use it as a whitening agent.

lithopone supplier in fillers, adhesives, joints and sealants

Because of their small size, nanoparticles may have unique physical and chemical properties. These properties may cause them to interact with living systems differently than larger materials with the same chemical composition (also known as bulk materials).

Pigment White 5; CI 77115; Deckweiss (Deut.); Lithopone (Deut.); litopón (Esp.); lithopone (Fr.); lithoponio (Gr.); litopone (It.); lithopoon (Ned.); litopone (Port.); Orr's white; oleum white; Griffiths zinc white; Sterling white; Albalith; Charlton white; Ponolith; Jersey Lily white; Sunotlith; Beckton white; Zincolith

Titanium dioxide nanoparticles have also been found in human placentae and in infant meconium, indicating its ability to be transferred from mother to fetus. 

A great number of other brands with fancy names have gone out of the German market, because of some defects in the processes of manufacture. The English exporters, as a rule, offer three or four grades of lithopone, the lowest priced consisting of about 12 per cent zinc sulphide, the best varying between 30 and 32 per cent zinc sulphide. A white pigment of this composition containing more than 32 per cent zinc sulphide does not work well in oil as a paint, although in the oilcloth and shade cloth industries an article containing as high as 45 per cent zinc sulphide has been used apparently with success. Carefully prepared lithopone, containing 30 to 32 per cent sulphide of zinc with not over 1.5 per cent zinc oxide, the balance being barium sulphate, is a white powder almost equal to the best grades of French process zinc oxide in whiteness and holds a medium position in specific gravity between white lead and zinc oxide. Its oil absorption is also fairly well in the middle between the two white pigments mentioned, lead carbonate requiring 9 per cent of oil, zinc oxide on an average 17 per cent and lithopone 13 per cent to form a stiff paste. There is one advantage in the manipulation of lithopone in oil over both white lead and zinc oxide, it is more readily mis-cible than either of these, for some purposes requiring no mill grinding at all, simply thorough mixing with the oil. However, when lithopone has not been furnaced up to the required time, it will require a much greater percentage of oil for grinding and more thinners for spreading than the normal pigment. Pigment of that character is not well adapted for use in the manufacture of paints, as it lacks in body and color resisting properties and does not work well under the brush. In those industries, where the paint can be applied with machinery, as in shade cloth making, etc., it appears to be preferred, because of these very defects. As this sort of lithopone, ground in linseed oil in paste form, is thinned for application to the cloth with benzine only, and on account of its greater tendency to thicken, requires more of this comparatively cheap thinning medium, it is preferred by most of the manufacturers of machine painted shade cloth. Another point considered by them is that it does not require as much coloring matter to tint the white paste to the required standard depth as would be the case if the lithopone were of the standard required for the making of paint or enamels. On the other hand, the lithopone preferred by the shade cloth trade would prove a failure in the manufacture of oil paints and much more so, when used as a pigment in the so-called enamel or varnish paints. Every paint manufacturer knows, or should know, that a pigment containing hygroscopic moisture does not work well with oil and driers in a paint and that with varnish especially it is very susceptible to livering on standing and to becoming puffed to such an extent as to make it unworkable under the brush. While the process of making lithopone is not very difficult or complicated, the success of obtaining a first class product depends to a great extent on the purity of the material used. Foreign substances in these are readily eliminated by careful manipulation, which, however, requires thorough knowledge and great care, as otherwise the result will be a failure, rendering a product of bad color and lack of covering power.